Rinnai PEPH-10PEW, Руководство по эксплуатации и установке

Страница: 9 / 16

Rinnai 9 PEPH_OIM
HOW TO OPERATE THE HEATER
PROGRAMMED OPERATION
In addition to MANUAL OPERATION the heater can also be operated using a PROGRAMMED OPERATION
function, allowing the user to program the heater to operate for a set time period(s) over a 24 hour cycle.
Setting The Clock.
1. Press the POWER button on the control panel console , press the TIME button this activates the time
"hour" edit mode, use the ‘Up’ or ‘Down’ buttons to set the Hours. Once the "hour" has been set press
the TIME button to set the "minutes" and use the ‘Up’ or ‘Down’ buttons to set the "minutes".
2. Once the "minutes" are set, press the time button to save the set time. The time displayed is in 24 Hour time.
Before the PROGRAMMED OPERATION can be used the clock will need to be set.
If the clock is not set when the heater is turned on the time will default to 00:00 (12 Midnight) and
will begin running from that time.
If the appliance is turned off using the power button the time will be saved.
If the appliance is turned off using the main power switch then the time setting will be lost and
will require re-setting.
NOTE
B A
2 5
4
3
9
2 A 3
4 5
3 4 5
3
NOTE
2
1