Rinnai PEPH-10PEW, Руководство по эксплуатации и установке

Страница: 13 / 16

Rinnai 13 PEPH_OIM
INSTALLATION
GENERAL
This heater is suitable for Do It Yourself installation. It can be either wall mounted (fixed installation) or freestanding
by mounting castors in accordance with these instructions. A phillips head screwdriver is included for freestanding
installation. For wall installation other tools and hardware may be required, depending on the wall material.
WALL INSTALLATION
The clearance from the sides, front and top of the heater must be at least 100mm as shown in the diagram below.
1. Ensure the heater is unplugged from the power socket outlet and the ‘on / off’ switch is in the off position before
commencing wall mounting.
2. For models PEPH15PEW & PEPH10PEW , loosen the locking screw and rotate the locking latch on the taller
leg of the mounting bracket and detach the mounting bracket from the back of the panel heater.
For model PEPH22PEW , loosen the locking screw on each leg of the mounting bracket, depressing both to
detach the mounting bracket from the back of the panel heater.
3. Position the mounting bracket on the wall. Ensure the two bottom mount holes are at least 175mm from the floor
and drill holes as required.
• This heater MUST NOT be located immediately below a socket-outlet.
• This heater MUST be positioned within one metre of a socket-outlet to ensure the flexible cord
and plug can reach it.
• This heater is NOT designed to be built in.
• DO NOT attach the castors to the heater base for wall installations.
• The heater is suitable for installation in non-communal baths and shower areas or bathrooms.
It is to be installed such that switches and other controls cannot be touched by a person in the
bath or shower. Consult your licensed electrical trades person for installation in communal
baths and shower areas or bathrooms.
Minimum
Clearance
100 mm
Minimum
Clearance
100 mm
Minimum
Clearance
100 mm
Minimum
Clearance
100 mm
Minimum
Clearance
100 mm
IMPORTANT
175mm
Loosen locking screw,
depress screw to release
Loosen locking screw,
rotate latch to release
PEPH15PEW PEPH22PEW
PEPH10PEW