Rinnai ORH15S Скачать руководство пользователя страница 11

Rinnai 

11 

ORH OIM

ELECTRICAL CONNECTIONS

WARNING

The  installation  of  electrical  wiring,  power  outlets,  and  switches  MUST  BE  performed  by  an 

authorised electrical installer.

GPO Connection 

The heater is provided with a power cord 

 with a 3 pin plug (models ORH15S, ORH18M and ORH24L are 

 with a 10 Amp plug and model ORH32XL is 

 with a 15 Amp plug) for connection to 

 

a

 

dedicated

 

single-phase 240V AC~ 50HZ earthed power outlet. Before connection, make sure that 

 of the power 

outlet meet the requirements of those indicated on the appliance dataplate.
The power outlet 

MUST

 be equipped with an automatic circuit breaker with rated current not less than 16A.

For switching the heater "ON" or "OFF" an accessible All-pole disconnection switch of suitable power rating should 

also be provided in accordance with wiring rules.

Direct Wired Connection

The heater is designed to also allow for direct connection to a suitably rated single-phase 240V AC~ 50HZ earthed 

power  supply.  Before  connection,  make  sure  that 

  of  the  power  supply  to  the  heater  meet  the 

requirements of those indicated on the appliance dataplate.
The power supply 

MUST

 be equipped with an automatic circuit breaker with rated current not less than 16A.

The  installation 

MUST

  be  equipped  with  an  accessible  all-pole  disconnection  switch  of  suitable  power  rating 

installed in accordance with wiring rules..
If the heater is being hard wired the circuit must be 

 with an "ON/OFF" isolation switch, in accordance with 

wiring rules.

LOCATION OF ELECTRICAL CONNECTION

Electrical connections or GPO’s 

MUST NOT

 be located at the back of the heater. They 

MUST 

be located outside 

the installation footprint of the units to reduce the effect of damage caused by heat build-up behind the heater
When mounted on an incline ensure the electrical connection is located at the lowest point of the heater.

MULTIPLE INSTALLATIONS

For connection of more than one heater to a common "ON/OFF" isolation switch refer to your authorised electrical 

installer.

Correct Installation

Incorrect Installation

INSTALLATION

Содержание ORH15S

















Отзывы: