Linear 1500 burn media installation: 13570-C |
7
9. Install A4 (from log set A)
A4 sits B1, ensure the large burner holes are not covered.
10. Install the stone set
Using the assembled image on p.2-3, position the stones. Unlike the log pieces the stones can be
positioned where you like, however DO NOT place over the burner ports. Stones 1, 5, or 7 can be
placed in the cross-lighting bridges.
11. Position the left over vermiculite
Place the remaining vermiculite around the burners and use to cover the metal log locator
brackets, if they are showing, and any other gaps.
12. Test operation
Check for cross-lighting and complete flame across all the burners, and check impingement on the
logs. Adjust logs A2, A3, or A4 if required. Some flames may lean back in the fire until the glass has
been installed. Refer following page for final flame pattern (with glass on) for the single and double-
sided models.
A4
B1
B2