10
| Linear 1500 burn media installation: 13570-C
Crushed glass and wire wool
1. Evenly spread the complete bag of crushed glass over the surface of the burner
BETWEEN
the fold lines
of the back and front burner. Ensure the gaps between the burners are kept
clear of glass pieces. This is important as these gaps provide secondary air to the unit, refer
guide on how to keep clear on the front page.
2.
Remove SMALL sections of the wire wool and place evenly across the burner where the flames
will be (otherwise it will do nothing). These provide a glow effect and will enhance the flame
picture.
Important
: Make sure the area around the pilot assembly is kept clear.
3.
Test operation by checking for cross-lighting and complete flame across all the burners. Some
flames may lean back in the fire until the glass has been installed.
