background image

 

38 

Rinnai Corporation ES08 Manual 

 

  

Limited Warranty Continued   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Replacement of the product may be authorized by Rinnai 
only.  Rinnai does not authorize any person or company 
to assume for it any obligation or liability in connection 
with the replacement of the product.  If Rinnai determines 
that repair of a product is not possible, Rinnai will replace 
the product with a comparable product at Rinnai’s 
discretion.  If a component or product returned to Rinnai 
is found to be free of defects in material or workmanship, 
or damaged by improper installation or damaged during 
return shipping, the warranty claim for product, parts and 
labor may be denied. 

*  If the Heat Exchanger fails due to a defect in material or workmanship within the sixth (6) through the tenth (10) 

year from the date of purchase, Rinnai will make the following allowances toward the purchase of a 
replacement Heat Exchanger: 

How do I get service? 

You must contact a state qualified/licensed contractor or authorized service provider for the repair of a product 
under this Warranty.  For the name of a qualified/authorized service provider please contact your place of 
purchase, visit the Rinnai website (www.comfortableheatingsolutions.com), call Rinnai at 1-800-621-9419 or write 
to Rinnai at 103 International Drive, Peachtree City, Georgia 30269. 

Proof of purchase is required to obtain warranty service.  You may show proof of purchase with a dated sales 
receipt, or by registering within 30 days of purchasing the product.  To register your appliance, please visit 
www.rinnairegistration.com.  For those without internet access, please call 1-866-RINNAI1 (745-6241).  Receipt of 
Registration by Rinnai will constitute proof-of-purchase for this product.  However, Registration is not necessary in 
order to validate this Warranty. 

What is not covered? 

This Warranty does not cover any failures or operating difficulties due to the following: 

• 

accident, abuse, or misuse 

• 

alteration 

• 

misapplication 

• 

force majeure 

• 

improper installation (such as but not limited to, condensate damage, improper venting, incorrect gas type, or 
incorrect gas pressure) 

• 

improper conversion (including conversions for inventory adjustment) 

• 

improper maintenance (such as but not limited to vent blockage) 

• 

incorrect sizing 

• 

any other causes other than defects in materials or workmanship 

This Warranty does not apply to any product whose serial number or manufacture date has been defaced.   

Limitation on warranties 

No one is authorized to make any other warranties on behalf of Rinnai America Corporation.  Except as expressly 
provided herein, there are no other warranties, expressed or implied, including, but not limited to warranties of 
merchantability or fitness for a particular purpose, which extend beyond the description of the warranty herein and 
further Rinnai shall not be liable for indirect, incidental, special, consequential or other similar damages that may 
arise, including lost profits, damage to person or property, loss of use, inconvenience, or liability arising from 
improper installation, service or use.  Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so the above limitation may not apply to you. 

Any implied warranties of merchantability and fitness arising under state law are limited in duration to the period of 
coverage provided by this limited Warranty, unless the period provided by state law is less.  Some states do not 
allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you. 

This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

 

Year of Failure 

Allowance 

6 50% 

7 40% 

8 30% 

9 20% 

10 10% 

Heat Exchanger 

Содержание ES08









































Отзывы: