Rinnai ES08, Руководство владельца по эксплуатации и установке

Страница: 17 / 40

Rinnai Corporation ES08 Manual 17
Drilling Flue Hole
Check for water and gas pipes as well as electric
cables. Drill the flue hole using a 3 1/8 inch (80 mm)
drill. The center of the hole must be located exactly at
the specified point.
See diagram. For weatherboard walls, drill through the
center of the weatherboard from the outside first and
then through the plasterboard. A template is provided.
A maximum of one elbow (FOT-158) may be used to
raise the flue manifold’s position by 6 in (154 mm)
relative to the appliance. Rotate the flue elbow 90° to
a vertical position and attach the FOT-158 so that it
opens toward the center of the appliance. If the FOT-
158 is used then do not use the template. The center
of the wall opening will be 16 1/2 in (418.5 mm) above
the base of the appliance.
Dimensions