Rinnai Demand Rapid DD1200E315L Скачать руководство пользователя страница 6

 

 6

   |   Demand Rapid owner & installer guide 12949-B 02-19

Maintenance and servicing

Hot water systems, like cars, require regular maintenance and servicing. To ensure longevity of 

your system we recommend the following.

Period

What needs to be done

Every six months

TPR valve(s)—operate the easing gear

Annually

Inspection and service of the entire hot water system, including 

inspection of the flue system (if applicable), cleaning of the INFINITY 

inlet water filter, draining and flushing of the cylinder if the water 

supply contains excessive levels of silt

TPR valve(s)

Located near the top of the 

cylinder—essential for safe 

operation. The TPR valve(s) 

automatically vent hot water if 

the temperature or pressure of 

the water in the cylinder gets 

too high.

Every six months operate the 

easing gear to remove lime 

deposits and check that it is 

not blocked. As the valve(s) 

will discharge hot water, 

ensure no one is near the 

drain line.

Failure to operate the 

relief valve easing gear 

at least once every 

six months may result 

in the water heater 

exploding.

Continuous leaking of water 

from the valve(s) may indicate 

a problem. It is important that 

you raise and lower the easing 

gear gently. During operation, 

if the valve does not discharge 

water when the easing gear 

is lifted, or does not seal 

again when closed, arrange 

for an authorised person to 

come and inspect the system 

immediately.

During servicing of your 

system the TPR valve 

needs to be checked and/or 

replaced. This needs to be 

done by an authorised person 

at intervals not exceeding 

five years, or more frequently 

in areas where the water is 

classified as hard.

A TPR valve must not be 

replaced with one that has a 

higher pressure rating than 

that specified for the cylinder.

Maintenance and servicing

Rinnai has a maintenance, 

service, and spare parts 

network with personnel who 

are fully trained and equipped 

to give the best advice on 

your Rinnai product. Regular 

maintenance and servicing 

is not covered by the Rinnai 

warranty.

For help locating a service 

person on your area call 

0800 746 624.

Lift until water flows

from the drain line,

lower gently

To 

water

heater

To drain line

How to operate the easing gear

TPR position - top of cylinder

WARNING

Содержание Demand Rapid DD1200E315L

























Отзывы: