Rinnai 09.12 Series, Руководство по эксплуатации

Страница: 8 / 28

Rinnai New Zealand Continuous Flow Water Heater Operation Manual
01-09
8
General Information
The flow will vary slightly depending on the incoming water temperature
and temperature selected. For example the w ater flow will be higher at
43 °C than at 55 °C.
There is also a minimum flow r ate required for the continuous flow unit
to start. So if a hot water tap is only opened a fraction there ma y not be
enough flow to start the unit.
43°C 55°C
The Rinnai continuous flow water heaters are factory preset to a
temperature limit of 55 °C (ex cluding one commercial model - Infini ty
HD200 external).
Temperature controllers are av ailable to allow precise digital tempe rature
control—a great safety feature if you have young children. Controllers can
be fitted at a ny time (except in solar installations) after installation of the
hot water unit.
There is a recommended system lay out for Rinnai continuous flow water
heaters used in solar installations. It is important y our installer configures
your solar system correctly as water heaters in solar installations produce
higher than normal temperatures.
Rinnai w ater controllers cannot be used with Rinnai continuous flow
water heaters in solar installations as the hot water does not always pass
through the continuous flow unit.
Servicing
Rinnai has a service and spare parts network with personnel who are fully trained and
equipped to giv e the best advice on your Rinnai appliance. If your appliance needs
servicing, please call Rinnai (0800 746 624) from a land line and select option one for
a service centre in your area.
F or reliable ope r ation Rinnai continuous flow water heaters in domestic applications should
be serviced e very two y ears (including inspection of the flue system if installed). A service
record has been pr o vided at the back of this manual. For commercial applications Rinnai has a
recommended Commercial Maintenance and Servicing Schedule. This is av ailable on request or
via our technical website - ww w.rinnai-tradesmart.co.nz.
Regular servicing is not covered b y the Rinnai warranty.
Do not attempt to carry out an y service work other than that mentioned in the troubleshooting
section. If you have an y other faults or problems, please refer to your installer or contact
Rinnai.
Solar installations
Temperature limit - factory preset
W ater flow