Rinnai 09.12 Series, Руководство по эксплуатации

Страница: 19 / 28

Rinnai New Zealand Continuous Flow Water Heater Operation Manual
01-09
19
Using shower
saver/bath fill
To stop shower
saver/bath fill
operations
When the
shower
saver/bath
fill operation
finishes
Using multiple
controllers
Press the ‘Shower Saver/Bath Fill’ button once. The button will illuminate
and a voice prompt and tone will sound. During ‘Shower Saver/Bath Fill’
operations the ‘Bath’ indicator will also be displayed on the Kitchen Deluxe
Controller digital monitor (when fitted).
The voice prompt will say “The hot water system is ready. Open the hot
water tap”. Open the hot water tap for the shower or bath.
The ‘In Use’ indicator will illuminate on all deluxe water controllers and the
shower will run or the bath will start to fill.
If you wish to stop the w ater flow while the shower s av er/bath fill function
is in operation, press the ‘Shower Saver/Bath Fill’ button. The button will
flash and the voice prompt will say “Hot water is not available. Turn off all
hot water taps and push the ‘Bath Fill’ button”. Follow the voice prompt
instructions.
Once the shower sav er/bath fill ope r ation finishes, the following occurs:
Flow from the shower/bath hot water tap stops.
‘Shower Sav er/Bath Fill’ button will flash.
Kitchen Delux e Controller (if fitted) ‘Bath’ indicator will flash.
A tone will sound.
The voice prompt will sa y “Bath fill is complete. Turn off the bath hot
water tap and push the ‘Bath Fill’ button.
Follow the voice prompt instructions. Note, the water heater will not allow
hot w ater to flow from a n y fixture until the ‘Shower S aver/Bath Fill’ button
has been pressed.
The water heater can be turned on and off at any water controller. If more
than one controller is fitted, press the ‘ Transfer’ button to transfer priority
to the desired water controller.
1.
2.
3.
4.
5.
Bathroom Deluxe Controller