RinKmo EI18, Инструкция по установке и эксплуатации, Страница: 3 / 8

INSTALLATION INSTRUCTIONS
1. Mark the positions of mounting
holes on the wall as the installation
template shows (Fig. 1).
NOTE: For ease of installation
and servicing, we recommend
that this unit be installed in an up
right position with the inlet and
outlet water connections at the
bottom.
2. Drill 4 mounting holes
(Ø6x32mm) at the marked position
(Fig. 2) .
3. Put espansion boltes into the
holes (Fig. 2) .
4. Put two screws into the upper two
holes (Fig. 3).
5. Remove the knob on front cover
and 4 screws on the top and
bottom edges of the unit, and then
d ismantle the front cover (Fig.4).
BEFORE MOUNTING
* THE UNIT MUST BE INSTALL BY QUALIFIED ELEC-
TRIC ENGINEER
1. The wall for installation of water heater must be firm and
solid and can bear four times the weight of the water
heater.
2. Indoor installation only. Do not install this water heater
near flammable, volatile substances or strong magnetic
fields. The unit must be installed in the vertical position of
the water pipe joint.
3. Be sure that the external power harness and air-opening
meet the standard requirements.
4. Gloves are required during installation.
PRODUCT DIMENSIONS
MOUNTING YOUR WATER HEATER
MOUNTING YOUR WATER HEATER
4 7/8"
(124mm)
7 1/8" (180mm)
3 1/8"
(80mm)
5 1/8"
(130mm)
13 1/8" (334mm)
14 1/4" (363mm) 14 1/4" (363mm)
Fig. 4
Fig. 1
Fig. 2 Fig. 3
Knob
Screw
Screw
Accessories contents
TOOLS/MATERIALS REQUIRED
(not include)
Measuring tape
Pencil
Phillips
screwdriver
Slotted
screwdriver
Safety gloves
Electric drill
1 installation template 4 espansion
boltes
4 screw
st 4.2x30
mounting
hole
espansion
bolte
Screw
espansion
bolte
c
b
a
a
Wall or other fixed objects that cannot be moved
INSTALLATION LOCATION
There should be a certain space around the machine for
installation and future maintenance.
a (side gap): minimum 12" (305mm)
b (top gap): minimum 15" (381mm)
WALL
7 1/8" (180mm)
5 1/8" (130mm)
14 1/4" (363mm)
WARNING: This unit should be installed by a qualified electrician or plumber in
accordance with federal, state and local electrical and plumbing codes.
WARNING: This water heater must be connected to a reliable earth connection
at all times.
WARNING: Make sure all circuit breakers and disconnect switches are off before
installation and maintenance.
WARNING: DO NOT install this unit in a location where it may be subject to
freezing temperatures. If the water inside your tankless water heater freezes, it can
cause severe and permanent damage that is not covered under your warranty.
The wall for installation of water heater must be firm and solid and can bear four
times the weight of the water heater.
WARNING: Indoor installation only. Do not install this water heater near
flammable, volatile substances or strong magnetic fields. The unit must be
installed in the vertical position of the water pipe joint.
This unit has more than one power-supply connection point. Disconnect all
power supplies before servicing.
WARNING: To avoid damage, the unit needs to be kept dry. Keep unit away from
direct sunlight moisture, dust, steam, and other liquids.
WARNING: The unit do not installed in places with water leaks (such as under
air conditioning lines that might leak or condense moisture or water pipes ).
WARNING: Be sure that the water heater are out of the reach of children so they
cannot adjust the temperature knob at will.
WARNING: The outlet water pipe can get very hot, make sure that the outlet
water pipe is out of the reach of children.
Installation location
There should be a certain space around the machine for
installation and future maintenance.
c
b
a
a
Wall or other fixed objects that cannot be moved
a (side gap): minimum 12" (305mm)
b (top gap): minimum 15" (381mm)
WALL
SUGGESTION:
WARNING: c (bottom gap): keep a distance out of the
reach of children
7 1/8" (180mm)
5 1/8" (130mm)
14 1/4" (363mm)
WARNING: This unit should be installed by a qualified electrician or plumber in
accordance with federal, state and local electrical and plumbing codes.
WARNING: This water heater must be connected to a reliable earth connection
at all times.
WARNING: Make sure all circuit breakers and disconnect switches are off before
installation and maintenance.
WARNING: DO NOT install this unit in a location where it may be subject to
freezing temperatures. If the water inside your tankless water heater freezes, it can
cause severe and permanent damage that is not covered under your warranty.
The wall for installation of water heater must be firm and solid and can bear four
times the weight of the water heater.
WARNING: Indoor installation only. Do not install this water heater near
flammable, volatile substances or strong magnetic fields. The unit must be
installed in the vertical position of the water pipe joint.
This unit has more than one power-supply connection point. Disconnect all
power supplies before servicing.
WARNING: To avoid damage, the unit needs to be kept dry. Keep unit away from
direct sunlight moisture, dust, steam, and other liquids.
WARNING: The unit do not installed in places with water leaks (such as under
air conditioning lines that might leak or condense moisture or water pipes ).
WARNING: Be sure that the water heater are out of the reach of children so they
cannot adjust the temperature knob at will.
WARNING: The outlet water pipe can get very hot, make sure that the outlet
water pipe is out of the reach of children.
b
b
a
a
Wall or other fixed objects that cannot be moved
a (side gap): minimum 12" (305mm)
b (bottom gap): minimum 15" (381mm)
WALL
Installation location
There should be a certain space around the machine for
installation and future maintenance
SUGGESTION:
WARNING:
c (bottom gap): keep a distance out of the
reach of children