RinKmo EI18 Скачать руководство пользователя страница 2

WARNING

[email protected]

▲ This water heater is used to provide domestic hot water 

for household use and can provide multiple outputs.

▲ If the water heater is not used, the connection with 

power supply shall be cut off. In order to avoid a hazard.

▲ If it is not used for a long time in winter, Drain the water 

from the the water heater to avoid water frozen which will 

damage the container. Please cut off the power supply 

before emptying.

▲ Keep the instructions after installation, you may need it 

later to get more information and support.

NOTE: 

This unit has multiple power inputs. Shut off all 

breakers before maintenance.

IMPORTANT INFORMATION

Thanks for being a valued                   Customer.

Hope this electric water heater you purchased could make 

your life better as we expected.

You're covered with Rinkmo 1-year free warranty to 

against any manufacturing defect. You are always 

welcome to reach us for warranty service or technical 

support, especially

1) when you received a damaged, defective electric water 

heater;

2) when you have any concerns, questions, or problems 

while using this electric water heater.

We will always appreciate your emails, and just as we are 

glad that you let us know something had gone wrong. 

To access customer service for technical support or 

warranty service, please email to 

rinkmo.service@out-

look.com.

▲ To ensure your own safety and that of others you need 

to read the installation and user instruction carefully before 

using the unit for the first time; Failure to comply with the 

instruction may cause property damage, serious injury, or 

death; If you have any questions, contact our company or 

the maintenance personnel appointed by our company.

▲ This unit should be installed by a qualified electrician or 

plumber in accordance with federal, state and local 

electrical and plumbing codes.

▲ When installing or using any high voltage electrical 

appliance, basic safety precautions should always be 

followed. 

▲ DO NOT install this unit in a location where it may be 

subject to freezing temperatures. If the water inside your 

tankless water heater freezes, it can cause severe and 

permanent damage that is not covered under your warranty.

▲ Water temperature over 125°F (52°C) can cause severe 

scalding. If the set temperature of the unit is too high, there 

is the possibility of hot water scalding. Children, disabled 

persons or the elderly in small households may need to set 

the temperature of the product below 113°F (45°C) in order 

to prevent possible harm caused by hot water.

▲ Where children or persons with limited physical, senso-

ry or mental capabilities are to be allowed to control this 

appliance, ensure that this will only happen under supervi-

sion or after appropriate instructions by a person responsi

-

ble for their safety. Children should be supervised to 

ensure that they never play with the appliance.

▲ This unit has more than one power-supply connection 

point. Disconnect all power supplies before servicing.

▲ To avoid damage, the unit needs to be kept dry. Keep 

unit away from direct sunlight, moisture, dust, steam, and 

other liquids.

The unit do not installed in places with water leaks (such 

as under air conditioning lines that might leak or condense 

moisture or water pipes ).

▲ Be sure that the water heater are out of the reach of 

children so they cannot adjust the temperature knob at will.

▲ The outlet water pipe can get very hot, make sure that 

the outlet water pipe is out of the reach of children, and 

must be insulated.

▲ 

This product is only used to heat water, do not use it to 

heat other liquids.

▲ Damage caused by water quality is not covered by the 

warranty.

▲ 

Make sure all circuit breakers and disconnect switches 

are off before installation and maintenance.

▲ Do not store inflammables and explosives near the 

water heater.

▲ 

Piping that has been treated with boiler seal, chromates, 

or other chemicals is not allow to use.

Attentions:

 This water heater must be connected to a 

reliable earth connection at all times.

Содержание EI18









Отзывы: