Installation and Operating Instructions for
Brake Caliper DH 012 FEM, cCSAus
spring activated
– electromagnetic released
E 09.766e
Issue: 20.03.2019
Version : 1
drawn:MAYA
checked: Ei
Pages: 16
Page: 5
supply voltage 230 .. 240V AC50/60Hz and 110 .. 120VAC 50/60Hz
with manual spring force adjustment and special frames
with plug combination and cable gland for connecting the supply voltage
There is a type plate on the brake with a 16-digit part number. The exact design of the brake is
defined by this article number only.
Identification:
Example:
As well as these instructions, please also consider the catalogue data for the brake at
www.ringspann.com and the drawings in the individual sections.
2.3 Standards, guidelines, protection class and certifications
The following standards and guidelines have been applied:
DIN VDE 0580
Electromagnetic devices and components
– General specifications.
2014/35/EU
Low-Voltage Directive
DIN EN 61000-6-2
EMC
– Immunity to interference in industrial areas
CSA C22.2 No. 14-13
Industrial Control Equipment
UL 508
Industrial Control Equipment
Electrical protection class:
IP65
Mechanical protection class:
IP10
In the sense of the Low-Voltage Directive 2014/35/EU.
Complies with Canadian and US American standards.
Enclosure type 3R“.
