RingGrip R2000B, Руководство пользователя

Страница: 6 / 8

6
Remove the cable tie and unravel the cordset
before operation.
The fan and motor assembly are attached to a 4-
position ratchet. Tilt up or down until the assembly
clicks into the desired position.
Press button 1 for a low speed, 2 for a medium
speed and 3 for a high speed. Press 0 to switch
the Pedestal Fan off.
To blow air in one direction and stop oscillation,
allow the Pedestal Fan to move into the desired
position and pull the clutch knob up. Press the
clutch knob down to return to a normal oscillating
function (Fig. 7).
(Fig. 7 Clutch)
Always disconnect electrical appliances before
cleaning them.
To clean the blade and grille assembly, fi rst
remove the safety grille, unscrew the locknut and
remove the blade from the Pedestal Fan. Wipe
them clean with a slightly damp sponge.
Clean the motor housing and body assembly with
a clean, damp cloth and wipe dry.
Never spray the Pedestal Fan with liquids or
submerge it in water or any other liquid.
Note: If the cordset of this appliance becomes
damaged, discontinue use. Repairs should be
undertaken only by a qualifi ed technician.
Specifi cations
R2000B
3 Speed, 40cm Pedestal Fan.
For indoor use only.
230-240V a.c., 50Hz, 50 Watt
Operation of your
Pedestal Fan
Care and Cleaning
Clutch