35
Press [ ] again, Ch2 Paired will appear in the monitor screen. This means
that the CH2 has been successfully paired. See below picture:
To select the EXIT and press [ ] once more to return to the screen of the
monitor unit.
5.
Repeat steps 1-4 to pair Ch3 and Ch4.
Troubleshooting
If you are not getting any signal at all:
Make sure the camera and the monitor are turned on.
Make sure the power plugs are pushed all the way in.
Check that the channel on the camera and the monitor are set to the same
number.
Recording or shooting does not work:
Insert SD card in SD card slot
Unlock the SD card
