27
Operation Instructions
Power Switch
1.
Press and hold three second the power switch
[
] to start the monitor unit
system. The power indicator (green) will light up.
2.
Start the camera unit system, press and hold three second the power switch
[ ], The power indicator (green) will light up to indicate the unit is now on.
3.
Once the monitor unit system is on, the iCore logo screen will appear and
the
system will automatically enter into monitoring status mode. The status bar
as
shown in Figure 6 will appear on the display screen.
Figure 5
Figure 6
Power Switch
Status
Bar
Power
Switch
