12
MAINTENANCE
Changing the Filters
Fig.10
Fig.11
!
!
WARNING
To reduce the risk of injury disconnect the
air cleaner from the power source (unplug)
before servicing or changing filters and
fuses. Failure to comply may cause serious
injury!
Change the filters (Fig.10 and 11)
NOTE: Care should be taken when handling
soiled or contaminated filters. As certain fine
dusts can be harmful. Always wear a suitable
mask for additional protection.
Check the inner and outer filters periodically,
depending on the amount of use, and change the
filters when needed. Clogged filters will reduce
the amount of air circulating through the filter.
1. Lift up the two clips Fig.10, (A) on the left and
right of the cabinet and remove the outer filter
Fig.11, (B) from the cabinet housing.
2. Pull the inner filter Fig.11, (C) out of the
cabinet.
3. Install a new inner filter. Make sure the filter
bags point inwards into the cabinet.
NOTE: The inner filter can be blown out with
air, or washed out to extend its life. Make
sure that a washed out filter is completely dry
before re-installing it in the cabinet.
4. Install a new outer filter. The arrow on the
outside of the filter indicates the proper direction
to insert the filter into the cabinet. Fig.11, (D)
5. Lock the clips Fig.10, (A) on the left and right
of the cabinet.
A
A
B
C
D
