background image

TABLE OF CONTENTS

Safety Instructions...............................................................3-7

Specifications...................................................................7

Electrical Safety.....................................................5,6,18

Carton Contents...............................................................8

Machine Overview.............................................................................9

Assembly ..................................................................10-11

Adjustments .................................................................. 12

Operation..................................................................13-15

Maintenance...........................................................15-17

Wire Diagram ............................................................18

Accessories ............................................................................18

Troubleshooting..................................................................19

Parts Diagram..................................................................20

Parts List............................................................................21,22

Warranty.............................................................................23

Page 2

NOTE:

 The specifications, photographs, drawings and information in this manual represent the 

current machine model when the manual was prepared. Changes and improvements may be made 

at any time, with no obligation on the part of Rikon Power Tools to modify previously delivered 

units. Reasonable care has been taken to ensure that the information in this manual is correct, to 

provide you with the guidelines for the proper safety, assembly and operation of this machine.

PAGE

SECTION

SAVE THESE INSTRUCTIONS.

Refer to them often.

This owner’s manual is not a teaching aid and is intended to show 

assembly, adjustments, and general use.

CALIFORNIA PROPOSITION 65 WARNING:

 Some dust created by power sanding, sawing, 

grinding, drilling, and other construction activities contains chemicals known to the State of 

California to cause cancer and birth defects or other reproductive harm. Your risk from 

exposure to these chemicals varies, depending on how often you do this type of work. To 

reduce your exposure, work in a well-ventilated area and with approved safety equipment, 

such as dust masks that are specially designed to filter out microscopic particles.

        For more detailed information about California Proposition 65 log onto rikontools.com. 

Содержание 50-114

























Отзывы: