Rikon Power Tools 10-050, Руководство пользователя

Страница: 9 / 27

9
Assembling the Optional Sliding Table
Please refer to the Sliding Table Attachment
manual located in the separate shipping carton for
proper installation procedures.
Installing Front Fence Rail
1. Identify the front rail (E), which is the larger “L”
shaped bar with the countersunk mounting holes
facing front.
NOTE: The front fence rail can be mounted
differently depending on the use of the cast
table wing or the sliding table attachment. When
using the table wing the front fence rail should
be installed as described below. Please refer to
the Sliding Table Attachment manual for proper
placement of the front fence rail. Figure 5.
2. Align the “L” shaped bar so the left notch (H)
matches the miter slot on the left extension wing.
3. Secure the front rail (E) to the table (G) and
table wings (F) with
fi ve countersunk head screws
(A). Tighten just enough to hold the rail next to
the table but keep loose enough to allow height
adjustment. Figure 6.
4. When the Front Rail has been correctly
positioned, tighten all mounting screws securely
with the
5MM L wrench provided.
Rear Fence Rail Installation
1. Identify the rear fence rail, which is the smaller
“L” shaped bar. Place against the table and align
as shown. Figure 7.
Assembly
Figure 7
Figure 6
Figure 5
E
F
G
A
B
C
D
E
A
E
G
H