2 Maintenance Mode
SC-8000
- 6 -
NOTE
If "F" (Fail) is displayed after the span adjustment, replace the sensor with a new one.
<When failing the test>
Continue supplying the gas. The result is not
displayed, and the span adjustment is automatically
started. CAL and APPLY are displayed alternately,
and the countdown is started.
(2)
Continue supplying
test gas
Stop supplying
test gas
The span adjustment is started after the countdown
finishes, and the result is displayed. Left: Test result,
Right: Adjustment result (P: Pass, F: Fail)
The results (P or F) <-> bump test result values <->
span adjustment result values are displayed
alternately every time the
▲
or
▼
switch is pressed.
Stop supplying the gas.
After checking the result, press ENTER.
The gas monitor returns to the calibration
mode menu.
Return to BUMP.
