Riken Keiki RX-8000, Руководство по эксплуатации

Страница: 45 / 51

7 Storage and Disposal 7-2. Procedures to use the gas detector again
RX-8000
- 44 -
7-2. Procedures to use the gas detector again
7-3. Disposal of products

When the gas detector is disposed of, it must be treated properly as an industrial waste in accordance
with the local regulations.

When disposing of the gas detector in EU member states, sort the batteries as specified. Handle the
removed batteries according to the classified refuse collection system and recycling system based on
the regulations of EU member states.
Contact RIKEN KEIKI for disposal.
Removing batteries
See Section 4-2 "Preparation for start-up" and take out the batteries.
For BUL-8000(R), BUL-8000(R1)
Model Type
BUL-8000(R)
BUL-8000(R1) Lithium ion battery
NOTE

BUL-8000(R), BUL-8000(R1) contains batteries.

Crossed-out recycle dustbin mark
This symbol mark is indicated on the products which contain the batteries which fall under EU Battery
Directive 2006/66/EC. Such batteries need to be disposed of as specified by the latest Directive.
This symbol mark indicates that the batteries need to be separated from the ordinary waste and disposed of
appropriately.
CAUTION
When you use a stopped or stored gas detector again, never fail to perform a gas calibration. For
information on readjustment including gas calibration, please contact RIKEN KEIKI.
WARNING

Do not disassemble the galvanic cell type sensor because it contains electrolyte. Electrolyte may
cause severe skin burns if it contacts skin, while it may cause blindness if its contacts eyes.
If electrolyte is adhered on your clothes, that part on your clothes is discolored or its material is
decomposed. If contact occurs, rinse the area immediately with a large quantity of water.

Dispose the batteries in accordance with procedure specified by the local authority.