Riken Keiki RX-8000, Руководство по эксплуатации

Страница: 13 / 51

3 Product Components 3-2. Names and functions for each part
RX-8000
- 12 -
3-2. Names and functions for each part
<Main Unit>
Name Function
(1) LCD display Displays gas concentrations, alarms, etc.
(2) Buzzer sound opening Emits a buzzer sound at an alarm. (Do not block it.)
(3) Alarm LED arrays The lamp blinks in response to an alarm.
(4) Infrared communication port
Used to carry out data communications with a PC in data logger
mode.
(5) ▲ /AIR switch
Keep this switch pressed to perform fresh air calibration. It is used
to increase numerical values.
(6) ▼ /PUMP switch Turns on and off the pump. It is used to decrease numerical values.
(7) PEAK/ESC switch Press this switch to change between display modes.
(8) POWER/ENTER switch Turns on and off the power.
(9) Gas inlet Connect a sampling hose to this port.
(10) Gas outlet Exhausts the gas drawn into the gas detector. (Do not block it.)
(11) Recharging jack cover
Remove this cover to connect an AC powered charger and
recharge the batteries.
(12) Recharging indicator lamp
Lights up in red during recharging and goes off when recharging is
completed.
(13) Battery unit screws Turn these screws to detach and replace the battery unit.
(1) LCD display
(2) Buzzer sound
opening
(4) Infrared communication port
(6) ▼ /PUMP switch
(3) Alarm LED arrays
(5) ▲ /AIR switch
(8) POWER/ENTER switch
(7) PEAK/ESC switch
(3) Alarm LED arrays
(2) Buzzer sound opening
(9) Gas inlet (10) Gas outlet
(11) Recharging jack cover (12) Recharging indicator lamp
(13) Battery unit screws
(3) Alarm LED arrays