RIKA X-COOK Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 25

RIKA X-COOK Скачать руководство пользователя страница 16

16

5. FITTING OPTIONS

MAKING AN EXTERNAL
COMBUSTION AIR FEED

(Optional: Fig: Panel)

->

Dismantle the rear wall as follows: Remove the 4

decorative  screws  and  silicone  disks  (Item  47,  48)
and  lift  the  Ceran  area  off  (Item  44).  Then  slacken
the  4  hexagon  bolts  (Item  49)  and  remove  the  lid
(Item 43). No simply pull the rear wall upward out of
the aluminium profiles (Item 50).

->

Cut out the pre-stamped, round section in the

rear wall (Item 46) [metal cutting saw blade].

Fasten the fresh air nozzle (must be ordered as an
option) using the screws supplied and refit it to the
rear wall.

->

Connect a non-flammable pipe to the fresh air

nozzle (e.g.: Steel spiral pipe) and fix this using a
hose clip (not included in delivery!)

->

The line should not be longer than 4 m and have

no bends in order to guarantee adequate air feed.

->

Should the pipe lead into the open air it must end

with a vertical 90°-downward or with a cowl.

Take strictly care on sufficient air intake! It is
not permitted to close the air intake opening!

«
...
14
15
16
17
18
...
»

Содержание X-COOK


























Отзывы:

Нет отзывов