EN
GL
ISH
27
THE ENAMEL APPLIED TO YOUR HEATING
APPLIANCE BECOMES FULLY HARDENED
THROUGH HEATING DURING INITIAL USE.
- Do not touch the surface during initial
heating. It will still be soft.
- To draw off the fumes that are liberated,
ensure that the area housing the appliance
is well ventilated and do not prepare food
in the vicinity of the appliance.
- Heat up the appliance thoroughly - this will
shorten the hardening time.
- The hardenimg of the surface will be
complete after several routine heating
operations.
Please refer to Chapter 1 for details of the
wood fuel to be burned and the correct
heating procedure.
THE ASH DRAWER (Fig. 6, Part 54)
In order to avoid excessive thermal stres-
sing of the grate, the ash drawer should be
emptied regularly.
Never heat up the appliance with the ash
drawer open
→
Danger of over heating
→
Guarantee is rendered null and void.
Caution: Burning embers can still be present
in the ash. Therefore only empty the ash into
a non-flammable container and do not place
the ash drawer on flammable surfaces.
ACTUATION OF THE VIBRATING
GRATE
The translatory motion of the vibrating
grate actuator causes the ash to be transfe-
red from the combustion chamber to the
ash drawer.
This leaves the path clear in the combus-
tion chamber for primary air - necessary for
the heating-up phase.
It is not necessary to activate the vibra-
ting grate during the heating-up phase.
DAMPER SETTING FOR NOMINAL
HEATING PERFORMANCE (Fig. 9)
Fuel
Wood
Brown coal
briquettes.
Primary air
Secondary air
Vibrating grate
Closed
1/2 open
Closed
Open
1/2 open
Open
Содержание AMATO
Страница 1: ...D i e S e e l e I h r e s H e i m e s R I K A K A M I N F E N M A N U A L A M AT O A M AT O B A C K...
Страница 2: ...Fig 1 Fig 2...
Страница 3: ...Fig 5 Fig 4 Fig 3...