Rigol DS1000E series Скачать руководство пользователя страница 151

Страница: 151 / 166

RIGOL

User’s Guide for DS1000E, DS1000D Series

4-1

Chapter 4

Troubleshooting

After the oscilloscopes is powered on, the screen remains dark (no
display):

(1)

Check the power cable connection.

(2)

Check if the power switch is turned on.

(3)

After the above inspection, restart the oscilloscope.

(4)

If the problem still remains, please contact

RIGOL

for help.

After the signal acquisition the waveform does not appear:

(1)

Check if the probes are correctly connected with the signals.

(2)

Check if the probes are firmly connected to the channels.

(3)

Check if the probes are correctly connected with the object being tested.

(4)

Check if the circuit can generate signal at the test point (Connect the probe

compensator output to an input channel to confirm whether the testing point
has no signal or the input channel is in some troubles).

(5)

Repeat the acquisition.

The measurement result is 10 times higher or lower than the value
expected.
Check if the probe attenuation is the same as the channel attenuation.

If the oscilloscope does not get a stable waveform display:

(1)

Check the

Trigger Source and notice if it is set to the channel in use.

(2)

Check the

Trigger Type. Use “Edge” for normal signals, and use “Video” for

VIDEO signals.

(3)

Switch the

coupling into HF Rejection or LF Rejection in order to filter the noise

which disturbs trigger.

(4)

Adjust the trigger

Sensitivity and the hold off time.

After pressing the RUN/STOP button, the oscilloscope does not display
any waveform on screen.
Check whether the

Trigger Mode is set to “Normal” or “Single” and see

whether the trigger level is out of the signal range. If yes, set the trigger level in

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание DS1000E series







































































































































































Результаты поиска

Содержание DS1000E series

Отзывы:

Похожие инструкции для DS1000E series

Бренды по названию

Популярные бренды

Rigol DS1000E series, Руководство пользователя

Результаты поиска

Содержание DS1000E series

Отзывы:

Похожие инструкции для DS1000E series

Бренды по названию

Популярные бренды