manualshive.com logo in svg

Rigol DP2000 Series, Руководство по программированию

Поделиться
Скачать
Rigol DP2000 Series Скачать руководство пользователя страница 95

Queries the current operation mode.

Parameter

Name

Type

Range

Default

<mode>

Discrete

{LOCal|REMote|RWLock}

LOCal

Remarks

•

LOCal: Local mode.

•

REMote: Remote mode. The touch screen and all front-panel keys are disabled

except for the front-panel output on/off keys and 

 key. At this point, you can

press the output on/off key only to disable channel output.

•

RWLock: Remote lock mode. The touch screen and all front-panel keys are
disabled except for the front-panel output on/off keys. At this point, you can
press the output on/off key only to disable channel output. You can only use the
specified command to disable the remote lock mode.

Return Format

The query returns LOCal, REMote, or RWLock.

Examples

:SYSTem:COMMunicate:RLSTate REMote /*Sets the power supply to 

remote mode.*/

:SYSTem:COMMunicate:RLSTate? /*Queries the operation mode. The 

query returns REMote.*/

4.11.7

:SYSTem:COMMunicate:RS232

4.11.7.1

:SYSTem:COMMunicate:RS232:BAUD

Syntax

:SYSTem:COMMunicate:RS232:BAUD

 <

baud>

:SYSTem:COMMunicate:RS232:BAUD?

Description

Sets or queries the baud rate of the RS232 interface. The unit is Baud.

 Command System

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

87

Содержание DP2000 Series


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды