Rigol DL3000 Series, Руководство пользователя

Страница: 66 / 163

RIGOL Chapter 2 Front Panel Operations
2-36 DL3000 User’s Guide
(2) Enter a value by using the numeric keys, arrow keys, or the knob. For setting
methods, refer to the descriptions of the help information or refer to the
descriptions in "Parameter Setting Method".
Set Slew_FAL
(1) In the main interface, press Slew_FAL to switch the parameter focus to
"Slew_FAL".
(2) Enter a value by using the numeric keys, arrow keys, or the knob. For
setting methods, refer to the descriptions of the help information or refer to
the descriptions in "Parameter Setting Method".
Set TRIG_SRC
(1) In the main interface, press TRIG_SRC to switch the parameter focus to
"TRIG_SRC".
(2) Press TRIG_SRC to select the type of the trigger source. You can also use
the Left/Right arrow key or the knob to select it.
5. Enable trigger
After you enable the trigger, the actual input voltage, current, resistance, and
power of the load will be displayed in the main interface.
WARNING
To avoid electric shock, ensure that the DUT is connected to the
input terminals of the load properly before you enable the trigger.
CAUTION
When the fan stops working, the channel is disabled. Then, a
message is displayed, "Fan stops running!"
Tip
In the guide interface, you can only use the numeric keys to input the value
for the parameter; in the main interface, you can use the numeric keys, the
arrow keys, or the knob to input the value for the parameter.
Tip
You can enable the trigger first and then the load input is automatically turned
on (The load sinks the current of Level B, and then the input will be updated
according to the preset value). You can also press the ON/OFF key on the
front panel first to turn on the input before you enable the trigger (The load
sinks the current of Level B, and then waits trigger to occur. After the trigger is
enabled, the input will be updated according to the preset value).