Rigol DG811, Руководство пользователя

Страница: 124 / 148

RIGOL Chapter 2 Front Panel Operations
2-94 DG800 User's Guide
same time, the DHCP mode takes precedence. Therefore, to enable this
mode, set DHCP to "Off".
3. ManualIP

In ManualIP mode, the network parameters of the generator, e.g. IP
address, are defined by users.

Tap the ManualIP parameter selection field to select "On" or "Off" to turn
the ManualIP mode on or off. If all the three IP configuration modes are set
to "On", the priority of parameters configuration from high to low is "DHCP",
"AutoIP", and "ManualIP". Therefore, to enable this mode, set DHCP and
AutoIP to "Off".

The format of the IP address is "nnn.nnn.nnn.nnn". The range for the first
segment (nnn) of the address is from 1 to 223 (except 127); and the range
for the other three segments is from 0 to 255. You are recommended to ask
your network administrator for an IP address available.

Tap the IP parameter input field in the LAN setting interface, and then input
a desired IP address by using the numeric keypad. The setting is stored in
the non-volatile memory and will be loaded automatically at next power-on
if DHCP and AutoIP are set to "Off".
Tip:

If all the three IP configuration modes are set to "On", the priority of
parameters configuration from high to low is "DHCP", "AutoIP", and
"ManualIP".

The three IP configuration modes cannot be set to "Off" at the same time.
VISA Address
VISA (Virtual Instrument Software Architecture), developed by NI (National
Instrument), provides an advanced programming interface to communicate with
various instruments through their bus lines. VISA enables you to communicate with
the instrument in the same way, regardless of the interface type of the instrument
(e.g. GPIB, USB, LAN/Ethernet, or RS232). The GPIB, USB, LAN/Ethernet or RS232
instrument which wants to communicate with VISA is called "resource".
VISA descriptor is the resource name and it describes the accurate name and
location of the VISA resource. If LAN interface is currently used for communication
with the instrument, the VISA descriptor is TCPIP0::192.168.001.102::INSTR.
To Set the Subnet Mask
In ManualIP mode, the subnet mask can be manually set.

The format of the subnet mask is nnn.nnn.nnn.nnn. Wherein, the range of "nnn"