Rigol DG811, Руководство пользователя

Страница: 122 / 148

RIGOL Chapter 2 Front Panel Operations
2-92 DG800 User's Guide
decimal point in the number parameter. It can be set to a decimal "." or a comma ",".
By default, it is a decimal ".". This setting is stored in non-volatile memory and will
not be affected by the "restore to defaults" operation.
Delimiter
Press Utility

System Setting

Delimiter to set the display format of the
delimiter in the number parameter. This setting is stored in non-volatile memory and
will not be affected by the "restore to defaults" operation.
When the decimal is set to ".", the delimiter can be set to "," "Space", or "None";
when the decimal point is set to ",", the delimiter can be set to ".", "Space", or
"None". The decimal point and the delimiter cannot be set to a decimal "." or a
comma "," at the same time.
System Log
Enables or disables the system log function. When enabled, the keys and prompt
messages can be recorded, and they will be saved to the internal memory in
Syslog.log file format.
Press Utility

System Setting

System Log to select "On" or "Off". The
default is "Off".
Interface
Press Utility

Interface to select a different interface type. You can set the GPIB
address, LAN interface parameters, or select the type of the device connected to the
USB interface. The interface selection is stored in the non-volatile memory.
To Set the GPIB Address
Each device connected to GPIB interface must have a unique address.
Press Utility

Interface

GPIB, and then use the numeric keypad to set the
GPIB address to any value ranging from 0 to 30. The default is "2". The selected
address is stored in the non-volatile memory.