PRECAUTION
- Before " " appearing, please don't touch your blood drop to the sample
entry on strip because meter is doing a internal test. If you do so, the
meter will show " " and " " and you will waste a strip.
37
36
- To ensure accurate test results, make sure the code number on your meter matches the
code highlighted on the vial of test strips you are using.
- If the code number does not match, change the Smart Code Key to the right one and redo
a test.
- If the meter turns off before you apply the blood sample, take out the unused test strip and
reinsert it. You have three minutes to apply the blood sample before the meter turns off
automatically.
- Please follow the local regulation and discard the
used strips properly.
- Before taking the blood sample, make sure of the sampling part is dry thoroughly. Water or
alcohol might affect the accuracy of testing.
Obtaining blood sample
1. Hold the lancing device to the soft side of your fingertip and press the
release button to get a tiny blood sample.
2. Obtain a small blood drop on your finger
In order to get a more accurate measurement, suggest to discard the
first drop of blood.
3. You can start measurement by the second drop of blood.
Performing a Test in Order
Performing a Test in Order
Applying blood sample to test strip
1. Touch the blood drop to the sample entry of the strip. The blood will
be drawn into the strip automatically.
2. Hold your finger on the sample entry until you hear a " beep " and the
view window is totally filled with blood. If the view window is not totally
filled with blood and/or the test does not start, discard the test strip
and repeat the test with a new test strip. When you repeat the test,
you may want to obtain the blood sample from a different finger if the
first attempt did not produce enough blood sample.
4. The minimum blood sample size of Glucose Monitoring System GM300 is 1.4 µL :( )
