Page 6 OF 8
Instruction # 53520
Step 5:
With the help of an assistant align the
cross support with the stickers on both leg
assemblies. See below. Insert (4) socket
screws
8
through the holes in the ends of the
cross support
6
and thread them into the weld
nuts that are held in place by the stickers. Do
not fully tighten. Check that the cross support
is level and parallel to the worksurface. Fully
tighten the socket screws.
Step 6;
Insert (2) end caps
9
into the ends of
the cross support
6
.
Both legs.
Step 5
6
9
8
Step 6
