Right Weigh 201-EBT-04, Руководство по установке и эксплуатации

Страница: 15 / 32

OPERATING MODES
15
Multiple Calibration (4CAL) mode CANNOT be used. For
more information on TCA requirements, refer to pages 7-8.
TCA OBM Requirement:
TRAILER / DOLLY
VEHICLE CONFIGURATION
OPERATING MODE
Air Suspension Single, Tandem,
or Tri Axle Group (2 HCV) with
1 Integrated Air Ride Lift Axle
Air Suspension Single, Tandem,
or Tri Axle Group (2 HCV) with
2 Integrated Air Ride Lift Axles
www.rwls.com
ON/OFF
HOLD 3 SECONDS
CALIBRATE
C
HIGH
1 C
LOW
2 3 4
ENTER
MENU
i
EL-003-0004
1 2 3 4 C/H C/L KG LBS
EXAMPLE:
1
2
EXAMPLE:
1
2
3
4
1
1
*In 4CAL mode,
the scale can store
four sets of
calibration data
for trailers that
have various
operating
conditions.
This trailer axle group has 1
integrated lift axle. Calibration
set “1” is when the lift axle is up
and set “2” is when the lift axle
is down.
On some 4-axle heavy-haul
trailers, there are two fixed
axles, a lift axle, and a flip axle
all on the same HCV. Many
operators use calibration set “1”
when only two axles are down,
calibration set “2” and “3” when
three axles are down, and
calibration set “4” when all four
axles are down.