wifi-nSTEP Instructions
Copyright Rigel Systems 2010
Page 11 of 12
www.rigelsys.com
From TOP LEVEL DISPLAY press
Menu
FOUR times to enter
TEMP SETUP
While in TEMP SETUP press
S-Menu
ONCE
for
DeltaTemp
T
his is the temperature change x10 to trigger a
compensation.
Use F+/F- keys to change the Delta Temp
value
While in TEMP SETUP press
S-Menu
TWICE
for
TempMove
Move this many steps for each Delta Temp
change. Direction of movement controlled by
sign of DeltaTemp.
Use F+/F- keys to change the TempMove value
Range is 0 to 75
While in TEMP SETUP press
S-Menu
THRICE
for
TempBklash
Apply this number of steps in last move direction
before reversing direction.
Use F+/F- keys to change the Delta
Temperature value
Usually not needed for Crayford focusers
While in TEMP SETUP press
S-Menu
FOUR
times for
Temperature Compensation
Mode
Use F+/F- keys to change the internal temperature
compensation mode between
Of
(off),
Ma
(Manual),
Au S
(Auto). Au(to) mode - must stay on this screen
while auto temp compensating, leaving the screen
turns off Au(to). Watch the position display or the 'S' or
'M' next to the Au to see movement. Entering MA or
Au mode, the current temperature is used as the
baseline. if in Au(to) mode, changing from this temp
will force an Au(to) move.
While in TEMP SETUP press
S-Menu
FIVE
times for
DoTempComp
If Temperature Compensation Mode is
Ma
(Manual) then press F+ to set the “
Prime for
Manual
” compensation using the current
temperature and position as the starting point.
If Temperature Compensation Mode is
Of
(off) or
Au S
(Aut) displays
Frce Comp Disabld
. Do
Temp Comp= S. Pressing either F+ or F- will
take the base temperature versus currently
display temp and move Delta steps base on
Temp delta.
