wifi-nSTEP Instructions
Copyright Rigel Systems 2010
Page 10 of 12
www.rigelsys.com
From TOP LEVEL DISPLAY, press
Menu
FOUR times for
MOTOR
ADVANCED
While in MOTOR ADVANCED press
S-Menu
ONCE to
SET STEPPING
Use F+/F- keys to change the stepping type
See ‘W’ in display, W=Wave, H=Half, F=Full
While in MOTOR ADVANCED press
S-Menu
TWICE to
SET COILS ON/OFF
Use F+/F- keys to change the Coils On/Off
This is indicated by 0 (On) or 1 (Off) to the
right of the stepping type (to right of H below)
While in MOTOR SETUP press
S-Menu
THRICE to
SET PHASE
Use F+/F- keys to change the phase select
This is indicated by 0,1,2,3,4,5 to the right of
the stepping type (to right of H below). Factory
setting is 0 for our steppers and most others.
To reverse direction set to 3.
