wifi-nSTEP Instructions
Copyright Rigel Systems 2020
Page 1 of 12
www.rigelsys.com
Hardware Connection
1)
Connect Stepper motor to wifi-nSTEP using supplied
VOICE
cable. Do
not
use DATA cables.
VOICE
cables can be identified by looking at the ends of
the cable. Color of wires are reversed comparing one end to the other.
2)
Connect wifi-nSTEP to external 12V DC using supplied power cable --
steppers will not work without 12V DC connected
3)
Connect wifi-nSTEP to PC usb port using supplied USB cable
4)
MANUAL OPERATION
: For
ALL
modes of operation,
12V must be supplied.
wifi-nSTEP can be operated from PC and manually.
•
For pc + manual operation,
Slide
mode switch
to
usb
•
For standalone manual operation
,
unplug usb cable
and
slide mode
switch to 12V
.
Press button to move focus in a direction. Rotate
button speed knob
to vary
speed from slow to fast.
High Speed mode.
While holding the first button down press the second
button to switch to high speed in that direction.
5)
Optional temperature probe plugs into 2.5mm jack.
Before Installing Software
Make sure that your windows account has
ADMIN
privilege as
ADMIN
privilege is
required to install drivers in Windows
Driver signature enforcement should only be disabled if you are positive that you
need it to be disabled. Driver signature enforcement can be re-enabled by simply
rebooting.
Preparing To Disable Driver Signature Enforcement In Windows 8/8.1
•
Press
Win + C
on your keyboard to open the Windows Charm bar.
•
Select
the
gear icon
in the charm bar. Selecting this icon will bring you to the
modern ui
control panel.
WINDOWS 8
•
Select ‘
General
‘, scroll all the way to the bottom of the page and click on the
restart button located under the ‘
Advanced Startup
‘ section.
•
After restarting in the advanced mode, a screen will come up with two options.
Select the ‘
Troubleshoot
‘ option.
•
When the ‘
Troubleshoot
‘ option is selected, another window will appear. Find
and click the option that says ‘Advanced options’.
•
In the advanced options window, select the ‘
Startup settings
‘ option.
•
Inside the ‘
Startup settings
‘ window, a list of selectable boot options will
appear. Press the
F7
key to disable driver signature enforcement.
•
Once you’ve selected the option to disable driver signature enforcement reboot
back into windows.
WINDOWS 8.1 or 10
•
In the
Modern UI
control panel find ‘
Update & recovery
‘ on the left hand side of
the menu.
•
Once in ‘Update & recovery,’ select ‘
Recovery
‘ in the list of options on the left
hand side of the
modern ui
menu.
•
After restarting in the advanced mode, a screen will come up with two options.
Select the ‘
Troubleshoot
‘ option.
•
When the ‘
Troubleshoot
‘ option is selected, another window will appear. Find
and click the option that says ‘Advanced options’.
•
In the advanced options window, select the ‘
Startup settings
‘ option.
•
Inside the ‘
Startup settings
‘ window, a list of selectable boot options will
appear. Press the
F7
key to disable driver signature enforcement.
•
Once you’ve selected the option to disable driver signature enforcement reboot
back into windows.
