6
Check your order
The Rifton Support Station comes fully assembled. Do not dispose of packaging materials
until you are completely satisfi ed that the product is installed properly and working.
If your shipment is incomplete or in any way damaged on arrival, please call
Customer Service, 800.571.8198.
Installation
To prevent falls and
serious injury:
• Make sure the bottom ends of the
vertical extrusions rest weight-bearing
on the fl oor.
• A qualifi ed professional, such as a
building contractor or maintenance
person, must securely install this
product to the wall using the following
procedure:
1.
Figure 6a:
Remove one end cap from
each horizontal crosspiece of the frame
with a fl at-head screwdriver. Slide
out the cover strips to access the bolt
holes. Fasteners are not included. Use
fasteners to suit the wall construction.
Installation must be adequate to support
a 250 lb.(113 kg) user.
2. Fasten product securely to the wall
with a minimum of two fasteners per
horizontal crosspiece.
3. Replace the cover strips and end caps.
4. Frame must be level and perpendicular
to the fl oor so that the height adjusters
move and latch smoothly.
5. If height adjusters do not operate
satisfactorily, contact Customer Service.
WARNING
Figure 6a
