7
WARNING
Figure 7a
Figure 7b
Back
Figure 7a:
The bath chair back adjusts in
15° increments with a one-hand latch. To
adjust the back:
1. Squeeze gray handle (A) up behind
chair back.
2. Rotate back to desired position.
3. Release gray handle to engage the
latches at desired angle.
Seat
Figure 7b:
The seat angle adjusts in 15°
increments. Increasing the angle can help
prevent the user from sliding forward on the
seat. To adjust the seat:
1. Pull the two gray triggers (B) under the
front edge of the seat towards you.
2. Rotate the seat to the appropriate
position.
3. Release both triggers to engage the
latches.
Seat with calf rest
To prevent serious
injury, fold calf rest
down during transfers. Full weight on
calf rest may break it or tip chair.
Figure 7c:
If you purchased the calf rest
option, it is attached to the seat front and
adjusts independently of the seat. To adjust
the calf rest:
1. Hold the calf rest firmly while pressing
the gray buttons (C) on both sides.
2. Adjust the calf rest to the desired angle.
3. Release both gray buttons engage
latches.
Figure 7c
A
A
BB
CC
