12
Figure 12a
Switching your tub transfer
base from counterclockwise to
clockwise configuration (or the
reverse):
1.
Figure 12a:
Remove the two screws with
a 5/32” hex tool. Lift the top platform
off. Remove the two plastic glides (A) and
the plastic plug (B) from the third hole
(easier to do from the back).
2.
Figure 12b:
Pry out the long plastic stop
(C) from the groove as shown. You may
need a screwdriver or other tool to pull
it out.
3.
Figure 12c:
Insert the plastic stop (C)
on the other end of the same groove as
shown. Then slide the rear slider (D) over
until it hits the stop.
4.
Figure 12d:
Set the top platform on
again; now the rear slider (D) should be
in the other rear hole as shown.
5. Insert the two screws again and tighten
with the 5/32” hex tool. Press the plastic
plug (B) into the empty third hole.
Now your tub transfer base is ready to use
in the opposite configuration.
Conversion kit
Figure 12e:
The conversion kit converts
the small pink or blue Rifton bath chairs
to a medium size, tool-free. Call customer
service to order.
Figure 12b
Figure 12c
Figure 12d
A
A
BB
CC
CC DD
BB
Figure 12e
Without calf rest With calf rest
D
D
