11
Figure 11c
Figure 11a
Figure 11b
A
A
BB
CC
Figure 11d
Figure 11e
D
D
Tub transfer base
To prevent falls and
injuries:
• Make sure front wheels are locked
during transfers.
• Make sure both front and rear bath chair
legs are securely latched onto the base.
The tub transfer base enables clients in the
bathchair to be transferred over a bath tub with
zero lifting.
Figure 11a:
To set up base:
1. Squeeze latches (A) on underside of base at
both ends, fold legs out until they click into
place.
2. Place legs of the wider end of the transfer
base in bathtub
Figure 11b:
To install bath chair onto tub
transfer base:
1. Rotate front and back bath chair legs up into
the horizontal position (see page 6).
2. Slide crossbar of front legs under the white
hook (B) on the narrower end of the transfer
base.
3. Push back of bath chair down firmly to latch
bar of rear bath chair legs under the gray
latch (C).
Transfers:
1.
Figure 11c:
To rotate top platform, press
either of the gray buttons (D) at one of the
front corners. Start transfers with bath chair
facing out from the tub.
2.
Figure 11c:
Pull tub transfer base forward if
desired and lock wheels. This allows room to
use a mechanical lift if needed.
3. Transfer user onto bath chair seat and secure
with strap(s).
4.
Figure 11d:
Release wheel brakes, push tub
transfer base over the tub and lock wheels.
5.
Figure 11e:
Rotate bath chair 90°, lifting
user’s legs over side of tub.
WARNING
