Rievtech PR-12 Series Скачать руководство пользователя страница 83

Страница: 83 / 260

6.1.2 Normally open immediate and normally closed immediate.

When PLC executes the instruction, the immediate instruction

obtains the actual input value, but the PLC does not update

the process image register.

The immediate contact update does not depend on the PLC

scan cycle; it will be updated immediately.

When the actual input point is 1, normally open immediate is

closed.

When the actual input point is 0, normally closed immediate is

closed.

In LAD,normally open immediate and normally closed

immediate instructions are represented by contacts.

Forcing function can

’

t be used for immediate input instructions.

6.1.3 NOT Reverse instruction

The functions of "NOT instruction" are as follows:

When the input is 0, the output is 1.

When the input is 1, the output is 0.

In LAD, the NOT instruction is represented by a contact.

Example:

Содержание PR-12 Series





































































































































































































































































Результаты поиска

Содержание PR-12 Series

Отзывы:

Rievtech PR-12 Series, Руководство пользователя и программиста, Страница: 83 / 260

Результаты поиска

Содержание PR-12 Series

Отзывы: