21
Power
Leads
Compressor
Housing
Power
Leads
Valve Plate
3. Position the compressor housing as shown in
the illustration. Notice the orientation of the
power leads.
Note: Make sure that the connecting rod
sleeves are seated against the compressor
housing.
4. Observe the orientation of the valve plate
assemblies. The tabs on the valve plate
indicate exhaust side. Place them on the
compressor housing as shown.
Note: Ensure the valve plate is properly engaged
to housing locators.
Note: Ensure that O-Rings are fully assembled in
grooves and not pinched.
Tab
Tab
