2.0 Warnings & Cautions
Carefully read this instruction section before using your
Riester
product. For your own safety and
that of your customers observe all cautionary information provided in this section. The following
information is intended to highlight potential safety hazards that can be associated with misuse,
or damage.
Warning
This product must not be used in the presence of flammable gases.
Do not disassemble or modify the battery. There are no serviceable parts inside.
Do not dispose of battery in fire, puncture or short curcuit.
Do not use a battery that is deformed, leaking, corroded or visually damaged. Handle a
damaged or leaking battery with extreme care. If you come into contact with electrolyte,
wash the exposed area with soap and water. If it contacts the eye, seek medical attention
immediately.
If the product emits a strange odour, heat or smoke, stop use immediately. The continued use
of a damaged product or part may cause injuries.
Do not immerse the unit in any liquid.
Do not use unit if damaged and periodically visually inspect for signs of damage.
Do not fit in damaged mains socket.
In the event of poor contact, pins can get hot. Care should be taken when removing.
Avoid trailing cables as potential trip hazards.
Federal law restricts this device to sale by or order of a physician.
Caution
Use only
Riester
battery
Charge only using
Riester
charger
Do not charge battery in any environment where the temperature may exceed 40º C or fall
below 0ºC.
Keep out of reach of children
For indoor use only (protect from moisture)
To prevent condensation from forming, allow instrument to come to room temperature before
use.
When replacing Lithium battery pack, turn indirect off and attach a new pack.
Electrical equipment can be effected by electromagnetic interference. If this occurrence
happens whilst using this equipment, switch the unit off and reposition.
!
!
