Riello RX 1000 S/PV, Инструкции по установке, использованию и обслуживанию

Страница: 28 / 84

20079424 26 GB
Calibration and operation
6.1 Operator panel with LCD AZL 21... display for control box LME 71... with PME 71.901...
Description of the keys
6 Calibration and operation
Key Function
- Access to Parameters Mode P
(press, at the same time, and plus or
- Enter in Parameters Mode
- Reset in the event of a lockout
- Access to a lower level of the menu
- In Service mode and Info mode, allows:
* the selection of the parameter (flashing symbol) (press the key for <1s)
* access to a lower level of the menu (press the key for 1 - 3 s)
* access to a higher level of the menu (press the key for 3 - 8 s)
* access to another mode (press the key for > 8 s)
- Reduction of value
- Access to a lower point of the modulation curve
- Scrolling of the parameter list
- Increase of value
- Access to a higher point of the modulation curve
- Scrolling of the parameter list
Exit function (ESC)
(press and simultaneously)
- Non confirmation of the value
- Access to a higher level of the menu
Lock-out lamp
Flame presence
Valve powered
Ignition transformer powered
Fan motor powered
Pre-heater active
Heat request
Info mode active
Service mode active
Unit of measurement
Description of the symbols
Lockout
Parameter mode active
only for fuel oil burners
Key to units of measurement
m
3
cubic metre
m3/h cubic metre/hour
l litre
l/h litre/hour
% size as percentage
The unit of measurement of the size
visualised is identified by the presence
of a dash in the corresponding unit of
measurement.
D8268
D8269
Fig. 30
VSD
A F
F A
/reset
D
8
2
7
3
ESC