Riello RS 34/E MZ, Инструкции по установке, использованию и обслуживанию

Страница: 43 / 76

41 20068131 GB
Start-up, calibration and operation of the burner
6.9 Backup / Restore procedure
At the end of the "Start-up procedure" it is opportune to make a
backup, creating a copy of the data memorised on the REC, in
the display panel RDI 21.
This will allow the data be used to programme a new REC or to
return to the memorised settings of the same REC.
6.9.1 Backup
To perform the backup, proceed as follows:

access the Parameters Level referring to "Access proce-
dure with password" at page 36.
The display screen displays the parameters group 400 .
With the key "-" :
Select the parameters group 000 :
The 000 parameter blinks, confirm using the "i/reset" key:
The display screen shows parameter 050 blinking:
Confirm with the key "i/reset" :
The parameter bAC_UP appears on the display screen:
confirm with the key "i/reset" :
The display screen shows the following value:
Use the button "+" :
The value will be set to 1 . Value 1 is flashing:
confirm with the button "i/reset" to activate the backup process.
The value 1 appears on the display screen:
After approx 5 seconds (it depends on the duration of the pro-
gramme), the 0 value appears on the display screen, this is to in-
dicate that the backup process has been completed correctly.
WARNING
We suggest carrying out this operation at the end
of each intervention that modifies what has been
set on the cam.
This will allow a restore to be easily carried out on
a new cam supplied as a replacement part, with-
out having to reprogramme the system.
D9023
P
V
%
s min h
D12140
h min s
%
P
/reset
D12141
h min s
%
P
/reset
D12142
h min s
%
P
V
/reset
D121
43
h min s
%
P
V
D
12144
h min s
P
V
/reset
D
12145
h min s
%
P
V
D12
143
h min s
%
P
V