Riello RS 310/M MZ, Инструкции по установке, использованию и обслуживанию

Страница: 23 / 64

21
20075344
GB
Installation
5.9 Gas butterfly valve
If necessary, replace the gas butterfly valve. The correct position
is indicated in Fig. 17.
5.10 Combustion head adjustment
Rotate the screw 1) until the notch you have found corresponds
with the front surface of the screw itself.
The combustion head is opened by turning the screw 1) anti-
clockwise.
The combustion head is closed by turning the screw 1) clockwise
(Fig. 18).
Central air adjustment:
The factory setting is shown in Tab. J
Tab. J
In the event that the specific application requires a particular ad-
justment, it is possible to change the central air flow rate using the
ring nut 4)(Fig. 19). To carry out this operation loosen the
screws 5)(Fig. 19) and move the ring nut 4)(Fig. 19). When fin-
ished, lock the screws 5) again (Fig. 19).
Fig. 17
20078516
NO
YES
Burner RS 310 RS 410 RS 510 RS610
Set-point 7 4 7 7
WARNING
Normally the calibrations indicated in Tab. J
should not be changed.
Fig. 18
20073539
Fig. 19
20077011