20146383
22
GB
Installation
4.7
Securing the burner to the boiler
Insert the thermal protection supplied with the blast tube 4).
Fit the entire burner onto the boiler hole, prepared previously,
as in Fig. 14, and fasten with the screws supplied.
4.8
Access to head internal part
In order to reach inside the combustion head (Fig. 15) proceed as
follows:
Disconnect the derivation unit socket 1);
Disconnect the servomotor socket 2);
Unscrew the fixing screws 5) of the manifold;
Open the burner on hinge;
Open partially of about 5.90 inch
Disconnect the cable of pilot electrode 6);
Open the burner;
Release the ignition pilot fitting 7);
Disconnect the oil pipe 8) and the air pipe 9);
Unscrew the lockout screw 10) of oil/air lance 10);
Extract the oil/air lance from the combustion head 11);
Remove the combustion head 11) from the pipe coupling.
To close, repeat the procedure in reverse order.
Prepare a suitable lifting system using the rings 3)
after having removed the casing 1) unscrewing
screws 2)(Fig. 14).
WARNING
The seal between burner and boiler must be air-
tight.
1
4
3
3
2
7
7
6
5
Fig. 14
20162841
Be careful as fuel may leak during this phase.
5
6
7
8
9
10
1
11
2
20162843
Fig. 15
Содержание RLAS 1000 EV
Страница 2: ...Original instructions ...
Страница 50: ...20146383 48 GB Appendix Spare parts A Appendix Spare parts ...
Страница 54: ......
Страница 55: ......
