Riello Gulliver BS1 Скачать руководство пользователя | Manualshive

Страница: 17 / 84

background image

15

20136130

GB

Installation

5.1

Notes on safety for the installation

After carefully cleaning all around the area where the burner is to
be installed, and arranging for the environment to be illuminated
correctly, proceed with the installation operations.

5.2

Instructions to avoid burnout or bad combustion of the burner

1

The burner can not be installed outside as it is suitable for
operation in closed rooms only.

2

The premises the burner operates in must have openings
for the air need for the combustion. To be sure about this,
you have to control CO2 and CO in the exhaust gases with
all the windows and doors closed.

3

If there are air extractors in the premises the burner works,
make sure that there are openings for air to be taken in that
are big enough to ensure the required air change; In any
case, check that when the burner stops the extractors do
not draw hot fumes from pipes through the burner.

4

When the burner is stopped, the smoke pipe must be kept
open and a natural draft created in the combustion chamber.
If the smoke pipe is closed, the burner must be drawn back
till the extraction of blast tube from the furnace. Before oper-
ating in this way take the voltage off.

5.3

Handling

The transport weight is given in chapter Technical data on
page 9.
Observe the permissible ambient temperatures for storage and
transport: -20... + 70 °C, with max. relative air humidity 80%.

5

Installation

DANGER

All the installation, maintenance and disassembly
operations must be carried out with the electricity
supply disconnected.

WARNING

The installation of the burner must be carried out
by qualified personnel, as indicated in this manual
and in compliance with the standards and regula-
tions of the laws in force.

DANGER

Combustion air inside the boiler must be free from
hazardous mixes (e.g.: chloride, fluoride, halo-
gen); if present, it is highly recommended to carry
out cleaning and maintenance more frequently.

After positioning the burner near the installation
point, correctly dispose of all residual packaging,
separating the various types of material.

CAUTION

Before proceeding with the installation operations,
carefully clean all around the area where the burn-
er will be installed.

The operator must use the required equipment
during installation.

«
...
15
16
17
18
19
...
»

Содержание Gulliver BS1





















































































Отзывы:

Нет отзывов

Похожие инструкции для Gulliver BS1

Бренд: T&C Страницы: 12

Бренд: T&C Страницы: 12

Бренд: baltur Страницы: 108

Бренд: ICI Caldaie Страницы: 112

Бренд: Warmington Страницы: 29

Бренд: Oilon Страницы: 100

Бренд: Unigas Страницы: 132

Бренд: Honeywell Страницы: 20

Бренд: Riello Страницы: 56

Бренд: Unigas Страницы: 56

Бренд: Unigas Страницы: 56

Бренд: Weishaupt Страницы: 84

Traditional Fire - Gas 1000

Бренд: Warmington Страницы: 27

Бренд: baltur Страницы: 50

Professional Series PRO36RBI

Бренд: Capital Страницы: 2

Бренд: Capital Страницы: 2

Professional Series PRO32RBI

Бренд: Capital Страницы: 2

Бренд: Camp Chef Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды