Riello GAS 6 P/M, Инструкции по установке, использованию и обслуживанию

Страница: 8 / 20

5244
6
ELECTRICAL CONNECTIONS TO THE WIRING TERMINAL BLOCK
(to be carried out by the installer)
NOTE
- The electrical wiring carried out by the installer must be in compliance with the rules in force in the Country.
- Leads minimal section 1 mm
2
.
- Adjustment for the motor thermal relay:
- at the beginning of the scale for 380V
- at the end of the scale for 220V
- Burners with non-stop operation. For safety reasons, this type of burner must be stopped every 24 hours of oper-
ation, by means of an hours-counter to be connected in series with the adjustment devices.
RWF 40 CONNECTION
D3378
D3379