15
Condexa Pro
Image
Description
CONDEXA PRO
50 P 70 P 100 P
1. ACCESSORIES TO COMPLETE THE SYSTEM
External probe
: it contains a probe to be installed in external
environment, model: NTC 10 kOhm@25°C, used for the climatic mode of
operation.
N.1 probe for each cascade system, to be wired in the Master boiler.
• • •
2. OPTIONAL ACCESSORIES
2.1 Safety devices
Manifold kit with safety devices for stand alone installation
: flow
manifold and housing of the safety devices for Condexa PRO stand
alone installations.
Accessory installed in the area below the boiler, allowing a
considerable saving of the space occupied.
kit composed with 3" manifold, insulation and the safety devices
listed below:
• Bourdon spring pressure gauge
• Safety pressure switch for manifold
• Thermometer 0-120 ° C 1/2 '' G.
• Safety valve VST 1/2 '' x 3/4 '' 5.4 bar
• Gas shutting valve (VIC) suitable up to 135 kW
• • •
Hydraulic separator connection kit for stand alone boiler
: flow
connection pipe.
Accessory installed in the area below the boiler, allowing a
considerable saving of the space occupied.
Complete with insulation, contains flow connections for both heating
and DHW circuit.
• • •
2.2 Hydraulic separator or plate heat exchanger
Horizontal hydraulic separator kit for stand alone boiler
: 4"
hydraulic separator
with insulation, for Condexa PRO stand alone installation.
It allows the hydraulic separation between the primary circuit and
the secondary circuit, balancing the differences in flow between
the circuits.
This device is necessary on systems equipped with control of
zones by means of thermostatic valves, in which the condition of
"zero" flow on the secondary circuit can be verified.
Accessory installed in the area below the boiler, allowing a
considerable saving of the space occupied.
This kit (combined with the safety manifold or with the
connector-to-the hydraulic separator manifold) acts as a
compensator / manifold reducing installation costs; therefore
it allows to have 2 flows (1 for the heating circuit and 1 for the
storage tank) and 2 returns.
• • •
Plate heat exchanger kit for 50 stand alone boiler
: it consists
of a braze-welded plate heat exchanger sized with
D
T
ml
= 7.2 ° C,
support bracket and connections to the boiler. This kit requires
the installation of the support frame kit.
•
Plate heat exchanger kit for 70 stand alone boiler
: it consists
of a braze-welded plate heat exchanger sized with
D
T
ml
= 7.2 ° C,
support bracket and connections to the boiler with a manifold
for three way valve installation (accessory). This kit requires the
installation of the support frame kit.
•
Plate heat exchanger kit for 100 stand alone boiler
: it consists
of a braze-welded plate heat exchanger sized with
D
T
ml
= 7.2 ° C,
support bracket and connections to the boiler with a manifold
for three way valve installation (accessory). This kit requires the
installation of the support frame kit.
•
