Riello AARIA MULTI 250 P, Инструкции по установке и техническому обслуживанию

Страница: 18 / 40

18
INSTALLATION
2 INSTALLATION
9
Ensure that the installation and operation sites are prop-
erly ventilated in order to disperse any gas leaks that could
cause flames during activities with intense heat generation
and high temperature.
9
Avoid proximity to sources of ignition in continuous op-
eration (open flames, gas household appliances, electric
stoves, lit cigarettes, etc).
9
Use equipment suitable for the system refrigerant.
9
Use an electronic leak finder properly calibrated for the sys-
tem refrigerant.
0
It is forbidden to use leak finders with halogen lamps.
2.1 Receiving the product
R
AARIA MULTI R32 is supplied in a single pack, protected by a
cardboard box and by polystyrene elements.
The following material is placed inside the packaging, below the
unit
Document envelope:
—
Instruction's book for the installer and for the Technical
Service in Italian
— Instruction's book for the installer and for the Technical
Service in English
— Warranty/Spare parts labels.
— energy label
— etichetta gas refrigerante
It is also supplied as kit:
All model
— 4 x vibration dampers
• Model 250
— Condensate outlet hose.
— 2 screws
— hexagonal key
• Model 355 - 370 - 475 - 485
— 2 condensate discharge connector
— 2 screws
— refrigerant line adapter connector
9
When you get the product, check immediately that the con-
tents are all present and undamaged. Contact the dealer
R
if you notice any problems.
9
The Instruction book comes with the equipment and it
should be taken, read and kept carefully.
9
The document envelope must be kept in a safe place. Any
duplicate must be requested from Riello S.p.A. which re-
serves to charge the cost.
2.2 Labels positioning
A Package label
B Transport label
B
A
A
2.3 Dimensions and weight
L
P
H
Model 250 P 355 P 370 P 475 P 485 P
Packaging dimensions
H 760 770 770 770 770 mm
L 949 998 998 998 998 mm
P 406 443 443 443 443 mm
Weight 46,4 55,0 58,0 65,0 65,0 kg